Description
Float Sensor – 1/4″ with push-fit connectors (FS-25) Regularly used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this Float sensor will also be placed in line with the Float on 1/4″ tubing, connected to the FMM, and communicate to your Apex the Float rate of water through that pipe. The Float sensor itself uses push-fit connectors to make connecting to your system as simple as imaginable. The FS-25 will work with Float rates from 3-12 gph. Return pump Measuring the Float of your aquarium’s main return pump is an incredibly useful piece of information. The key benefit would be to have the Apex notify you the instant the Float stops for any reason – Regularly the result of a failed or faulty pump. Furthermore, an indication of a reduced Float rate could be used to resolve that the pump or the lines are dirty or are becoming clogged with algae, debris, animals, or the growth of organisms inside your plumbing. Auxiliary pumps on reactors and the like This can be a very handy application for the FMM. Place a Float sensor on a device like a carbon/gfo reactor and it serves many purposes. First off, you’ll know if your pump is not on or is faulty. Next, you’ll easily fine-tune the Float into the reactor by watching the dashboard tile on your Apex. In any case, you’ll know when the reactor is becoming clogged with detritus or possibly channeling has occurred by an alert on your Apex or by monitoring your dashboard. Put a Float sensor inline to your device, plug it in to the FMM, and see exactly the Float rate of the water (any aquarium fluid in reality) going through that sensor. The industrial-grade Float sensors work use either a turbine or paddle-wheel mechanism (depending on the model) to measure the Float.
Uses push-fit connectors to make connecting to your system easy
The FS-25 will work with Float rates from 3-12 gph.
Reviews
There are no reviews yet.